Place your dry crystal directly onto the center of the LED lens.
Cover your area with newspaper to protect against stains . Use a saucepan that will no longer be used for food .
This guide was written in response to a mix of user experiences. Some customers have been thrilled with the final result, calling the kit "super durable and looks so cool". Others have expressed significant frustration with crystals that didn't grow or glow as promised, and with instructions that were confusing or incomplete. Place your dry crystal directly onto the center
You didn’t stir the dye enough, or the compound itself was old. Fix: Next time, stir the dye into the hot solution for at least 2 minutes before pouring. If the compound is old, no colour can save it.
Flip the power switch to watch your crystal formation illuminate from within, highlighting the jagged crystalline structure! Troubleshooting & Common Fixes This guide was written in response to a
Always wear the safety goggles and gloves included in the kit.
Heat the water until it is boiling. Using a microwave or a kettle works best. , or the powder will not dissolve completely. Step 2: Mix the Crystal Powder Carefully pour the hot water into your mixing container. You didn’t stir the dye enough, or the
Insert the required batteries (typically 3 x AAA batteries, not included) observing correct polarity, or plug in the provided USB cord.
Turn on the switch to watch the internal colors refract beautifully through the geometric facets of your custom crystal.