Firmly plug the cable back in, ensuring it clicks or locks into place tightly. 3. Check and Clean the Memory Modules (Advanced)
Reseat the cable firmly until it clicks securely into the terminal port.
In some cases, the error occurs because the "Cheetah Panel Connect Setting" is not enabled. sc673-10 ricoh error
This error is primarily a handshake failure within the machine's internal networking. Common causes include:
Unplug and visually inspect the main interface harness running down the panel arm support. Firmly plug the cable back in, ensuring it
Physical damage or component failure on the main controller board. Step-by-Step Troubleshooting Guide
If the code returns immediately after a reset, a physical component may be failing: In some cases, the error occurs because the
Physical vibrations from high-volume printing can loosen the internal cables that bridge the screen to the main body. Turn off and unplug the machine.
Wait at least to allow the capacitors on the boards to drain fully.
In Ricoh’s service language, "SC" stands for Service Call. The code is officially defined as a Control Panel Communication Error at startup.