Find SP 5-810 (SC Reset) and select Execute .
The motor responsible for moving the fuser rollers into the "press" or "release" position is defective or disconnected.
If the gear appears stuck, it may need to be freed manually or the fuser unit replaced. 4. Perform a Firmware Update sc56900 ricoh new
The SC569-00 code triggers when the Home Position (HP) sensor fails to detect the pressure release cam returning to or leaving its starting position within a predetermined time limit.
Open the front door and release the locking latches of the fuser assembly. Find SP 5-810 (SC Reset) and select Execute
Turn the machine off, unplug it for 60 seconds, and restart it to see if the error clears. Inspect the Fuser Area:
The error code on Ricoh machines indicates a failure in the pressure roller lift mechanism within the fuser unit Turn the machine off, unplug it for 60
If it isn't spinning during the warm-up test.
To clear the engine lock, apply the standard Ricoh Service Program (SP) reset sequence: