: Right-click the SatlinkTools executable and select "Run as administrator" (especially on Windows 7, 8, or 10). Establish Connection : Turn on the finder.
If the power cut out during the flash, the device may no longer boot.
If the software does not detect the meter, try turning the meter off and then back on after clicking start in the software.
The device will usually restart automatically once the upgrade is successful. Critical Precautions
Reduces instances of the device freezing or crashing during a scan.
: Old firmware contains outdated satellite frequencies.
on the device and select "Software Update" or "Upgrade" .
If you encounter issues during the firmware flash, use these quick fixes to resolve them:
If a yellow exclamation mark shows, download and update your USB-to-Serial driver. Step 3: Flash the Firmware
When the program interface loads, match the default parameters outlined in your specific software package documentation. Click the or File button to open your file explorer. Select the extracted firmware update file ending in .bin . Click Next or Confirm inside the software interface. Step 5: Initialize the Upgrade
: Some websites provide updated channel lists (.bin files) for WS-6906 that can be loaded via RS232 using loader software like "Upgrade By RBS".
The progress bar should appear, showing the transfer of the firmware from the PC to the meter. 6. Finalize the Upgrade Wait for the "Upgrade Success" or "Completed" message.
Connect the WS-6906 to your PC via USB while holding the "Power" button . The PC should detect an "ATMEL" or "Rockchip" device. Install the provided PL2303 or CP210x drivers.
