Motomaster Battery Charger 111567 Manual Verified __hot__ -
Keep your battery charged, your terminals clean, and your clamps secure.
Before connecting the charger, carefully read all safety warnings and instructions printed on the charger, your battery, and your vehicle. Always disconnect the charger from the AC outlet before connecting or disconnecting the DC output clamps to reduce the risk of a spark. The connection procedure depends on your battery's location and grounding: motomaster battery charger 111567 manual verified
Keep the charger away from rain, snow, and standing water. What type of vehicle or battery are you trying to charge? Is the battery still inside the vehicle or removed? Keep your battery charged, your terminals clean, and
If the charger displays an error code (e.g., F01, F02, F04) or a flashing red light, refer to this table for causes and solutions. These codes are taken directly from verified Motomaster troubleshooting sections. The connection procedure depends on your battery's location
| Parameter | Details | |-----------|---------| | | 111567 | | Compatible Battery Types | Standard (Flooded), AGM, Gel, Deep Cycle | | Voltage Settings | 6V / 12V (Auto-sensing) | | Charge Rates | 2A, 10A, 55A (Engine Start) | | Display Type | Analog ammeter or digital LED (check unit) | | Power Cord Length | 6 ft (approx.) | | Output Leads | 6 ft (approx.) with color-coded clamps | | Safety Certifications | cUL / CSA listed |
A: The charger reports voltage full, not capacity full. You likely have a sulfated or worn-out battery with high internal resistance. Get a load test at an auto parts store. The charger is fine; the battery is failing.