Equatech Universal Tv Wall Mount 32 To 100 Instructions Jun 2026

: Align the two vertical bracket arms with the holes on the back of the TV.

: Carefully slide the TV horizontally along the plate rails to adjust its left-to-right centering if needed. Engage Safety Locks :

Follow these steps carefully. Read through the entire process once before you begin so you know what to expect.

After hanging:

: Select the correct size bolts from the hardware kit. Use spacers if the TV has a curved back or if the bolts are too long.

Route your power cables and HDMI cables out of the way so they do not get pinched during the hanging process.

Gently pull on the TV to ensure it's securely attached to the wall mount. equatech universal tv wall mount 32 to 100 instructions

Having the right tools ready will make the installation process smooth and efficient. Tools Needed: Stud finder (high-quality electronic model preferred) Bubble level (if one is not built into the wall plate)

This guide covers general Equatech universal mount instructions. Always read the specific manual included with your product, as minor variations exist between fixed, tilt, and full-motion models.

Select the screws from the Equatech kit that fit your TV’s depth and thread size. : Align the two vertical bracket arms with

If you tell me the or the type of wall (drywall, brick, concrete) you're mounting on, I can offer more specific tips. Alternatively, I can help you:

If your TV current has feet or a base stand attached, unscrew and remove it now.

Using a masonry drill bit (typically 3/8" or 10mm ), drill four holes directly into the concrete or brick. Ensure you do not drill into mortar lines between bricks, as mortar cannot support the weight of a large TV. Read through the entire process once before you