Computer Manual Free Better - Echo T3 Cycle

To ensure accurate readings, the device must be programmed with your specific wheel circumference. Enter Setup Mode

[ Handlebar / Stem ] ------> [ Echo T3 Bracket ] | [ Fork Blade ] ------------> [ Wired/Wireless Sensor ] | (Max 5mm Gap) [ Wheel Spoke ] -----------> [ Wheel Magnet ] 1. Mounting the Bracket

Echo T3 Cycle Computer Manual: Free Guide and Setup Instructions

The Echo T3 uses a "Mode" button to cycle through various data screens: echo t3 cycle computer manual free

: Place one CR2032 lithium battery into the compartment. Ensure the positive (+) side faces up.

: The screen flashes KM/H or M/H . Tap the Left button to toggle between them, then press the Right button to lock it in.

: Usually a dead CR2032 battery. When replacing, ensure the positive (+) pole faces the battery cap. To ensure accurate readings, the device must be

Secure it tightly using two zip ties. Pull them flush and snip the excess plastic. 2. Route the Sensor Wire Wrap the wire carefully down the front brake cable housing.

After setting the wheel size, the display will usually flash "KM/H" or "M/H". Use the button to toggle and Left to confirm. Clock (CLK) : Navigate to the Clock mode. Hold the Left button for 3 seconds to enter setting mode. Adjust hours and minutes using the Right button. Installation Tips

Go to and search "Echo T3." They host a scanned, searchable PDF version. You can read it online for free or download it as a PDF. Ensure the positive (+) side faces up

: If it is a wired model, wrap the sensor wire around the brake cable housing to keep it away from moving parts. Where to Find Manuals

Why a Free Manual Matters