Download Hpe Custom Image For Esxi 6.5 U3 [extra Quality]

Following Broadcom's acquisition of VMware, the download architecture has been consolidated into a single unified customer environment. Direct deep-linking is no longer available, so you must navigate the portal manually using these explicit navigation steps:

Once you have downloaded the ISO, you can install it using one of the following methods: 1. Using HPE iLO Virtual Media (Recommended) Connect to your server via iLO. Open the Remote Console. Select > CD/DVD > Image File . Select the downloaded HPE Custom Image ISO. Reboot the server and press F11 for the Boot Menu. Select the Virtual CD/DVD option. 2. Using HPE USB Key Utility Download the HPE USB Key Utility . Flash the ISO onto a USB drive. Insert into the server and boot from the USB device. Important Considerations

ESXi 6.5 U3 does not support all HPE server generations. Ensure your hardware is compatible: Most HPE ProLiant Gen9 and Gen10 servers. download hpe custom image for esxi 6.5 u3

Ensure your server’s BIOS/UEFI and iLO firmware are compatible with 6.5 U3 before installing.

His guardian, a weary sysadmin named Elias, sat in the glow of a dual-monitor setup at 2:00 AM. Elias knew he couldn't just use a generic installer. To truly unlock Unit 42’s potential—to see the temperatures of his drives and the true speed of his Smart Array controllers—he needed the . Open the Remote Console

He knew immediately what the problem was. HPE servers are robust machines, but they are finicky about their drivers. The generic VMware ISO didn't include the specific Smart Array driver needed for this generation of controller.

How to Download the HPE Custom Image for ESXi 6.5 U3 Deploying VMware vSphere ESXi on Hewlett Packard Enterprise (HPE) ProLiant servers requires specialized software drivers. Using the standard VMware base image often leads to missing storage controllers, unrecognized network cards, and a lack of hardware monitoring. To avoid these issues, you must use the HPE Custom Image for ESXi. Reboot the server and press F11 for the Boot Menu

| Image Type | Target Hardware | Typical Filename Pattern | | :--- | :--- | :--- | | (Gen8 & earlier) | Older ProLiant servers (Pre‑Gen9) | VMware-ESXi-6.5.0-Update3-[build]-HPE-preGen9-[version]-depot.zip | | Gen9 Plus (Gen9, Gen10, & later) | ProLiant Gen9, Gen10 and newer | VMware-ESXi-6.5.0-Update3-[build]-HPE-Gen9plus-[version]-depot.zip or HPE Gen9 Plus Custom Image for ESXi 6.5 U3 Offline Bundle |

Updated: May 2026

View hardware status directly in the vSphere client.