Reinstallation is the reverse: refit the body to the tails, tighten the grub screws (do not overtighten), reconnect the water supplies, and check all seals for leaks.
Turn the V200 control handle fully to the "open/on" position and rotate the temperature selection all the way to maximum hot.
Drill or confirm two holes spaced exactly from centre to centre. caraflo v200 shower instructions
Uses thermostatic control to maintain consistent water temperature, preventing sudden blasts of hot or cold water. Standard Operation:
Hard water and scale buildup are the primary enemies of thermostatic shower valves. Regular maintenance keeps the Caraflo V200 functioning smoothly. Cleaning the Exterior Reinstallation is the reverse: refit the body to
Includes NCC certification, WRAS approval, and TMV2 scheme approval. Compatibility:
Before beginning installation, verify that the plumbing lines match the official physical constraints of the hardware: 45mm center-to-center Total Width: 168.2mm Depth From Wall: 75mm Thread Pitch: 1/2" BSP male threaded brass tails Approvals: TMV2 Scheme, WRAS, and NCC Certified After thermal mapping
Many Caraflo models feature a "trigger" on the showerhead. This allows you to lather up without wasting water, then click the trigger to rinse. 2. Temperature Regulation Tips
Open all taps (including the shower) to the "mid" position between hot and cold.
This was buried in the fine print. After thermal mapping, you have exactly 17 seconds of ideal-temperature water. Use it wisely. Arthur lunged for the shampoo. He got one armpit lathered before the water turned to a lukewarm mist.