| Problem | Likely cause | Solution | |---------|--------------|----------| | No display | No mains power | Check socket and fuse | | Charger stops early | Bad battery cell | Test battery with load tester | | ERR on display | Clamps reversed | Swap red/black connections | | Hot smell | Overload / poor ventilation | Unplug, cool 30 min, reduce battery size | | Never shows FULL | Battery sulfated | Run RECON mode once |
Clean battery terminals and reattach clamps. Check the external blade fuse. The unit has overheated from continuous high-load use. bradex bx60 battery charger manual full
Connect the clamps to the , before plugging the charger into the mains. | Problem | Likely cause | Solution |
Do you need assistance understanding based on its capacity? Share public link Connect the clamps to the , before plugging
Ensure the cooling fan is running and vents aren't blocked. Let the unit cool down for 30 minutes. Battery is overheating or overcharging.
Arthur looked at the BX60. The needle was still on 0.0V. But the clamps were warm. Not hot. Warm like skin.