Adjustment Program Epson — 1390 Resetter Fixed

Run the Adjustment Program as an Administrator (Right-click > Run as Administrator).

Even with a "fixed" adjustment program, things can go wrong. Here is how to solve them:

Read the waste ink counter to confirm, then purchase a Reset Key to complete the reset. Important Maintenance Note adjustment program epson 1390 resetter fixed

Finding your Epson 1390 stuck with blinking red lights is a classic "service required" headache. Usually, this means the internal waste ink pads are "full" according to the printer’s counter, even if the hardware is fine.

Resetting only fixes the software lock; users are strongly advised to physically clean or replace the waste ink pads or install an external waste ink tank to avoid physical damage to the printer or workspace. Critical Usage Requirements Run the Adjustment Program as an Administrator (Right-click

Epson designs its printers with internal porous pads to absorb excess ink during head cleanings and printing. To prevent ink from leaking out of the machine and onto your desk, the printer uses a digital counter called the .

Leave the Port selection on or manually select the specific USB port connected to your printer. Click OK . Step 3: Enter Particular Adjustment Mode Important Maintenance Note Finding your Epson 1390 stuck

The counter read:

Follow these technical steps, and your Epson 1390 will be printing high-quality glossy photos again, with the resetter utility fully operational on your PC.