A: Not natively. You must run it in a Windows virtual machine (VMware, VirtualBox) with USB passthrough.
Before opening the tool:
Once settings are verified:
If this version fails to work for you, consider these alternatives:
Disclaimer: Mass production tools write directly to hardware components. Incorrect configuration files can permanently disable ("brick") your USB device. Proceed at your own risk. Step 1: Identify Your USB Controller 3s usb mass production utility ver 3287 top
Run the executable ( MPTool.exe or 6698_MPTool.exe ) as an . Step 3: Configure the INI Profile
To use this utility without causing further damage, follow these steps: A: Not natively
| Controller Family | Common Flash Drive Examples | |------------------|-----------------------------| | 3S 6677 | Many generic USB 2.0 drives | | 3S 6679 | Early USB 3.0 drives | | 3S 9085 | PNY, ADATA, Kingston older models | | 3S 916 | USB 3.0 with 4-channel support |
Mass Production (MP) tools are factory-grade software used during the manufacturing process to burn firmware onto USB controllers and partition the NAND memory. For end-users, version 3.287 is primarily used to fix: Step 3: Configure the INI Profile To use
The flash drive uses a non-3S controller (e.g., Alcor, Phison, Silicon Motion).